View source for Processing:Pre and Post Processing

__NOTOC__
There are many pre and post processing tools available for CE-QUAL-W2.  Below are just a few of the more common tools that you will find helpful when setting up a model and viewing its results.<br><br>

== Pre Processing ==
One of the most difficult aspects of any CE-QUAL-W2 models is the generation of the input files, both geometry as well as the  flow and meteorological data.  Without some kind of pre-processor it is virtually impossible to set up and debug all of the necessary model files.  The following tools provide functionality for pre-processing raw data to develop CE-QUAL-W2 input files.
*[[WMS]] by [http://www.ems-i.com/ EMS-I]
*[http://www.loginetics.com/modtools/2DMOD.html AGPM and W2i by Loginetics]

== Post Processing ==
Good graphical output of a CE-QUAL-W2 model is essential to calibrate a model and then convey results to interested stakeholders.  The following tools provide post-processing functionality for CE-QUAL-W2
*[http://www.loginetics.com/modtools/2DMOD.html AGPM and W2i by Loginetics]